John's Landing
You can remote view QT Series by using Internet Explorer in a PC system or using Safari 5.0 in MAC OS 10.6 system. No windows 10.
for smartphone instructions click
qt-gen .
Step 1) Make sure you have the correct ip address.
Step 2) Log into the wifi by the camera pole the WPA password is 1111111111
using Internet Explorer go the the following :
http://192.168.1.110:5800
User Name and password have been given to the Board .
Step 3) Make sure you are using Internet Explorer and have the ActiveX settings configured.
To allow activeX controlls that are needed to view cameras in Internet Explorer.........
1. Open Internet Explorer
2. click on TOOLS > INTERNET OPTIONS > SECURITY > CUSTOM LEVEL
3. scroll down to "Download unsigned activeX controlls: and change to "prompt"
3 scroll down to the next box "Initialize and script activeX..." and change to "prompt"
4.click OK and OK again ....close internet explorer and try again. Thins time a bar will come up and ask you if
it is ok to download and install the activeX control.
YOU ONLY HAVE TO DO THIS THE FIRST TIME YOU VIEW THE CAMERAS.