Waterford Landing

Front Cameras

Back Pool Cameras

Car Wash

Pond

Building 10

Building 11

 

You can remote view QT Series by using Internet Explorer in a PC system or using Safari 5.0 in MAC OS 10.6 system

 

for instruction manual click h

for smartphone instructions click he

qt-gen

 How to log into your cameras
 
1.  using Internet Explorer on your computer log into http://thesecuritycam.com
2.  select tab at top for HOA live video
3.  select your community name from the list of left side of page.
4.  click on view cameras link.
5.  if this is your first time .... windows will ask you if it is ok to download the activeX control.  say YES  and YES again.
6.  when the logon screen comes up.... change username to ****** and password enter ******
7.  when it says (if no video click here) then click there
8.  you will see only 1 camera...but at the bottom of the screen are icons to pick multi-camera views.
9.  you are now watching live camera views at 1frame per second. A vehicle may zoom by and you don't see the tag but it is being recorded at 20 fps.
10.to play back recorded video....  click on the search tab at the top... enter all info ie (date time and camera #)
11.you will see speed controls etc just like any video.
12.from this point on.... fill in info on the right side of screen to change time date or camera view.
13.when you need more help at this point call Andy  407.383.7305
 
Thank You !!

Step 1) Make sure you have the correct ip address.

Step 2) Log into the wifi by the camera pole the WPA password is 1111111111

using Internet Explorer go the the following :

http://192.168.1.110:5800 North Fountain

http://192.168.1.111:5801 Island

http://192.168.1.112:5802 South Fountain

User Name and password have been given to the Board .

 

Step 3) Make sure you are using Internet Explorer and have the ActiveX settings configured.

http://q-see.com/files/ResourceFiles/Enabling%20Active%20X%20for%20Windows.pdf

Step 4) The network you are connecting from - might be blocking the DVR .

For example, places like a library or office network might prevent you from logging in to your

security camera.

Step 5) Make sure the DVR is up and running.

 

Step 7) Use Internet Explorer to log in. You can not use Internet Explorer (64 bit) or IE(no add on).

Step 8) Log in to windows as an Administrator level, not the user level.

Step 9) Anti-Virus programs such as Norton and Kaspersky might block the ActiveX download from

the DVR; most of these internet security programs give you the option of disabling them for a

short period of time.

Step 10) Some of our DVRs do not support Internet Explorer 9, you can use the optional client software

to view the cameras. You can download the software from www.q-see.com

Step 11) Only the QT Series and QC Series support Mac viewing.

Step 12) For mobile phones, you might not have enough bandwidth to connect. Also make sure you are

using the correct mobile app and the firmware on the DVR is up to date.


Step 13) If you are able to log into the DVR but unable to see the live feed; check your video card driver

and DirectX properties. Make sure the DirectX features are enabled. If the DirectX features are

not enabled, update the DirectX and video card drivers by updating your video drivers.

 

 

To allow activeX controlls that are needed to view cameras in Internet Explorer.........

 

1. Open Internet Explorer

2. click on TOOLS > INTERNET OPTIONS > SECURITY > CUSTOM LEVEL

3. scroll down to "Download unsigned activeX controlls: and change to "prompt"

3 scroll down to the next box "Initialize and script activeX..." and change to "prompt"

4.click OK and OK again ....close internet explorer and try again. Thins time a bar will come up and ask you if

it is ok to download and install the activeX control.

YOU ONLY HAVE TO DO THIS THE FIRST TIME YOU VIEW THE CAMERAS.